Shuttle FV24 User Manual Download Page 71

Page: 71 / 86

- 69 -

Integrated Peripherals

OnChip IDE Channel0

The chipset contains a PCI IDE interface with support to two IDE chan-

nels. Select Enabled to activate the primary IDE interface; select

Disabled to deactivate this interface

The choice: Enabled or Disabled.

OnChip IDE Channel1

The chipset contains a PCI IDE interface with support to two IDE chan-

nels. Select Enabled to activate the secondary IDE interface; select

Disabled to deactivate this interface

The choice: Enabled or Disabled.

IDE Prefetch Mode

The onboard IDE drive interfaces support IDE prefetching for faster

drive access. If you install a primary and/or secondary add-on IDE

interface, set this field to Disabled if the interface does not support

prefetching.

The choice: Enabled or Disabled.

Summary of Contents for FV24























































































Search results

Summary of Contents for FV24

Reviews:

Related manuals for FV24

Brands by name

Popular brands

Shuttle FV24, User Manual

Search results

Summary of Contents for FV24

Reviews:

Related manuals for FV24

Brands by name

Popular brands