Shuttle FV24 User Manual Download Page 26

Page: 26 / 86

- 24 -

Step 13

Install Driver & Software Components

Please note that all the system utilities and drivers are designed for Win 9x/

2000/ME/NT operating systems only. Make sure your operating system is

already installed before running the drivers installation CD-ROM programs.

1. Insert the FV24 bundled CD-ROM into your CD-ROM drive. The

auto-run program will display the drivers main installation window on

screen.

2. Select the Mainboard related program.
3. Install VIA 4-in-1, AGP, and Audio drivers.
4. Return to the main installation window and select the Hardware Monitor

related program.

5. Install Hardware Monitor driver.
6. Return to the Hardware Monitor installation window and exit the auto-run

driver installation program.

7. Install LAN driver.

]

The LAN device driver can't be set up automatically, please refer to

section

Chapter 4 Software Utility

to manual installation.

Summary of Contents for FV24























































































Search results

Summary of Contents for FV24

Reviews:

Related manuals for FV24

Brands by name

Popular brands

Shuttle FV24, User Manual

Search results

Summary of Contents for FV24

Reviews:

Related manuals for FV24

Brands by name

Popular brands