Shuttle FT61 Manual Download Page 72

Page: 72 / 78

- 68 -

RTC Alarm Resume

When this item enabled, your can set the date and time at which the
RTC (real-time clock) alarm awakens the system from Suspend mode.

The choice: Disabled or Enabled.

Data (of Month)

This item selects the alarm date.

Key in a DEC number:Min=0, Max=31.

Resume Time (hh:mm:ss)

This item selects the alarm Time.
[hh]

Key in a DEC number:Min=0, Max=23.

[mm/ss]

Key in a DEC number:Min=0, Max=59.

PS2 Keyboard Power ON

This item allows you to set the PS2 Keyboard Power On function

The choice: Disabled, Password, or Hot KEY.

KB Power ON Password

This item allows you to set the KB Power On Password.

Press" Enter" to set Password.

Hot Key Power On

This item allows you to set the Hot Key Power On.

The choice: Any Key, or Ctrl-F1~Ctrl-F12.

PS2 Mouse Power ON

This item allows you to enable or disable the PS2 Mouse Power On.

The choice: Disabled or Enabled.

Summary of Contents for FT61















































































Search results

Summary of Contents for FT61

Reviews:

Related manuals for FT61

Brands by name

Popular brands

Shuttle FT61, Manual

Search results

Summary of Contents for FT61

Reviews:

Related manuals for FT61

Brands by name

Popular brands