- 59 -
VDIMM Voltage
This item allows you to set VDIMM Voltage.
Ø
The Choice: Auto, 2.6V, 2.7V, 2.8V.
Note: Over voltage may damage DDR module.
VAGP Voltage
This item allows you to set VAGP Voltage.
Ø
The Choice: Auto, 1.6V, 1.65V, 1.7V.
Note: Over voltage may damage AGP Card.
CPU Voltage set
This item allows you to set CPU Voltage.
Ø
The Choice: Auto, 0.8250V ~ 1.5875V.
Note: Over voltage may damage CPU.
------ Now DDR Frequency -----
It shows current frequency of DDR Clock.
Memory Frequency For
This item allows the user to adjust Memory Frequency.
Ø
The Choice: Auto, SYNC, DDR-200, DDR-266, DDR-333
or DDR-400.
DRAM Over Clock By
This item allows the user to fine tuning Memory Clock.
Ø
The Choice: 0 ~ 15MHz.
Memory Timing Parameter
The value in this field depends on performance parameters of the installed
memory chips(DRAM). Don't change the value from the factory setting
unless you install new memory that has a different performance rating
than the original DRAMs.
Ø
The Choice: Auto or Manual.
