- 68 -
Power On by Ring
This item determine the system will resume by activating of modem
ring.
Ø
The choice: Enabled or Disabled.
USB Wake-up from S3
If you are using a USB keyboard, and the ACPI suspend type is set to
S3, you can enable this item to allow a keystroke to wake up the system
from power saving mode.
Ø
The choice: Enabled or Disabled.
Resume by Alarm
When this item enabled, your can set the date (day of the month) and
time to turn on your system.
Ø
The choice: Disabled or Enabled.
*** Reload Global Timer Events ***
Global Timer (power management) events are I/O events whose occur-
rence can prevent the system from entering a power saving mode or
can awaken the system from such as a mode. In effect, the system
remains alert for anything that occurs to a device that is configured as
Enabled, even when the system is in a power-down mode.
Primary/Secondary IDE 0/1
When these items are enabled, the system will restart the power-saving
time out counters when any activity is detected on any of the drives or
devices on the primary or secondary IDE channels.
Ø
The choice: Disabled or Enabled.
FDD, COM, LPT Port
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the floppy disk drive,
serial ports, or the parallel port.
Ø
The choice: Disabled or Enabled.
PCI PIRQ [A-D] #
When this item is disabled, any PCI device set as the Master will not
power on the system.
Ø
The choice: Disabled or Enabled.
PWRON After PWR-Fail
This item select power on function when power fail.
Ø
The choice: Off, On, or Former-Sts.
