- 67 -
Blank Screen
This option only writes blanks to the video
buffer.
DPMS
Initial display power management signaling.
Ø
The choice: V/H SYNC+Blank, Blank Screen, or DPMS Supported.
Video Off In Suspend
This item determines the manner in which the monitor is blanked.
Ø
The choice: Yes or No.
Suspend Type
This item allows you to select the Suspend Type.
Ø
The choice: Stop Grant or PwrOn suspend.
MODEM Use IRQ
This determines the IRQ which the MODEM can use.
Ø
The choice: 3, 4, 5, 7, 9, 10, 11, or NA.
Suspend Mode
When this item enabled and after the set up time of system inactivity, all
devices except the CPU will be shut off.
Ø
The choice: Disabled, 1Min, 2Min, 4Min, 8Min, 12Min, 20Min,
30Min, 40Min, or 1Hour.
HDD Power Down
When this item enabled and after the set up time of system inactivity,
the hard disk drive will be powered down while all other devices
remain active.
Ø
The choice: Disabled or 1 Min~15 Min.
Soft-Off by PWR-BTTN
Under ACPI you can create a software power down. In a software
power down, the system can be resumed by Wake UP Alarms. This
item lets you install a software power down that is controlled by the
power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to Delay4
Sec. then you have to hold the power button down for 4 seconds to
cause a software power down.
Ø
The choice: Instant-Off or Delay 4 Sec.
Wake-Up by PCI card
This item Enabled/Disabled PCI card wake up for PCI Spec 2.2.
Ø
The choice: Enabled or Disabled.
