- 44 -
SS=Single Side DIMM module.
DS=Double Side DIMM module.
Note:
You do not need to set any jumper to configure memory since the BIOS utility
can detect the system memory automatically. You can check the total system
memory value in the BIOS Standard CMOS Setup menu.
2. Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR
SDRAM modules in available DIMM banks. The total system memory is
calculated by simply adding up the memory in all DIMM banks. After up-
grade, the new system memory value will automatically be computed and
displayed in the field "Standard CMOS Setup" of BIOS setup program.
Memory Support Mode
DIMM
MODE
DIMM 1 (A Group)
DIMM2 / DIMM3 (B Group)
x8 SS or
x16
x8 DS
x8 SS or
X16
x8 DS
Mixed x8
DS and x8
SS or x16
DDR200
One
One
Two
One
One Only
DDR266
One
One
Two
One
One Only
DDR333
One
One
Two
One
One Only
DDR400
One
One
One
One
One Only