- 37 -
CPU and System Fan Connectors (FAN1/2/3)
The mainboard provides three onboard 12V cooling fan power connectors
to support the CPU (FAN1) and the system (FAN2/FAN3).
IR Header (JP8)
If you have an Infrared device, this mainboard can implement IR transfer
function. This mainboard supports Normal, IrDA, ASKIR, or SCR transfer
mode. To enable this function, attach a 6-pin infrared device cable to the IR
(JP8) header. Please note that every pin is properly allocated. If not, your IR
device may be damaged.
Pin Assignments:
1=NC
2=KEY
3=VCC
4=GND
5=IRTX
6=IRRX
SENSE
GND
+12V
1
E2
E3
Note: Both cable wiring and type of
plug may vary, which depend on the
fan maker. Keep in mind that the red
wire should always be connected to
the +12V header and the black wire
to the ground (GND) header.
JP8
1
1 3 5
2 4 6
FAN2
1
FAN3
1
FAN1
1
JP8
1
IR
