- 37 -
CPU and System Fan Connectors (FAN1/2/3)
The mainboard provides three onboard 12V cooling fan power connectors
to support the CPU (FAN1) and the system (FAN2/FAN3).
Note: Both cable wiring and
type of plug may vary, which
depend on the fan maker. Keep
in mind that the red wire should
always be connected to the
+12V header and the black wire
to the ground (GND) header.
IR Header (JP4)
If you have an Infrared device, this mainboard can implement IR transfer
function. This mainboard supports Normal, IrDA, ASKIR, or SCR transfer
mode. To enable this function, attach a 6-pin infrared device cable to the IR
(JP4) header. Please note that every pin is properly allocated. If not, your IR
device may be damaged.
Pin Assignments:
1=NC
2=KEY
3=POWER (5V)
4=GND
5=IRTX
6=IRRX
SENSE
GND
+12V
1
E2
E3
1
JP4
1 3 5
2 4 6
1
FAN2
1
FAN3
1
FAN1
IR
JP4
1
