manualshive.com logo in svg

Shuttle AK38, User Manual

Share
Download
Shuttle AK38 User Manual Download Page 73

- 70 -

IRQ/Event Activity Detect

Options are in its sub-menu.
Press <Enter> to enter the sub-menu of detailed options.

PS2KB Wakeup Select
This item let you set PS2KB Wakeup type.

Ø

The choice:  Hot Key or Password.

PS2KB Wakeup from S3/S4/S5
This item let you set the Hot Key to awaken the system from S3/S4/S5.

Ø

The choice:  Disabled, Ctrl+F1~Ctrl+F12, Power, Wake or Any

     Key.

PS2MS Wakeup from S3/S4/S5
Enable this item let you to awaken the system from S3/S4/S5 by PS2MS.

Ø

The choice:  Enabled or Disabled.

USB Resume from S3
This item let you enable USB Resume from S3.

Ø

The choice:  Enabled or Disabled.

V G A
When this item enabled, you can set VGA to awaken the system.

Ø

The choice:  OFF or ON.

LPT & COM
When LPT & COM stays On, any activity from one of the listed system
peripheral devices or IRQs wakes up the system.

Ø

The choice:  NONE, LPT, COM, or LPT/COM.

HDD & FDD
When HDD & FDD stays On, any activity from one of the listed system
peripheral devices wakes up the system.

Ø

The choice:  OFF or ON.

PCI Master
When PCI Master stays On, any activity from one of the listed system
peripheral devices wakes up the system.

Ø

The choice:  OFF, or ON.

PowerOn by PCI Card
This item enables/disables the power on function of PCI Card.

Ø

The choice:  Disabled or Enabled.

Summary of Contents for AK38


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands