Shuttle AK38 User Manual Download Page 69

Page: 69 / 81

- 66 -

UART Mode Select
This item allows you to select which mode for the Onboard Serial Port
2.

The choice: Normal, IrDA, ASKIR or SCR.

UR2 Duplex Mode
This item allows you to selects the IR half/full duplex function.

The choice: Full or Half.

Onboard Parallel Port
This item allows you to determine onboard parallel port controller I/O
address setting.

The choice:: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, or Disabled.

Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port. Select
Normal, Compatible, or SPP unless you are certain your hardware and
software both support one of the other available modes.

The choice: SPP, EPP, ECP, or ECP+EPP.

ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode.

The choice: 1 or 3.

Game Port Address
This item selects Game Port Address.

The choice: Disabled, 201, or 209.

Midi Port Address
This item selects Midi Port Address.

The choice: Disabled, 330 or 300.

Midi Port IRQ
This item selects Midi Port IRQ.

The choice: 5 or 10.

Init Display First

This item allows you to decide to activate PCI Slot or on-chip VGA first.

The choice: PCI Slot or AGP.

Summary of Contents for AK38


















































































Search results

Summary of Contents for AK38

Reviews:

Brands by name

Popular brands

Shuttle AK38, User Manual

Search results

Summary of Contents for AK38

Reviews:

Brands by name

Popular brands