- 36 -
3.3 System Memory Configuration
AK32V/AK32VN mainboard has two 184-pin DIMM slots that allow you to
install from 64MB up to 1GB of system memory.
Each 184-pin DIMM (Dual In-line Memory Module) Slot can accommodate
128MB, 256MB, 512MB, and 1G of PC1600/PC2100 compliant 2.5V single
(1 Bank) or double (2 Bank) side 64-bit wide data path DDR SDRAM mod-
ules.
Install Memory:
Install memory in any or all of the slots and in any combination shown as
follows.
Note: Maximum installed memory is 2GB.
Note: You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional DDR
SDRAM modules in available DIMM slots. The total system memory is
calculated by simply adding up the memory in all DIMM slots. After up-
grade, the new system memory value will automatically be computed and
displayed in the field " Standard CMOS Setup" of BIOS setup program.
DIMM
Socket
Memory Modules
Module
Quanti-
ty
DIMM 1
128MB, 256MB, 512MB, and 1G 184-pin 2.5V
DDR SDRAM DIMM
x 1
DIMM 2
128MB, 256MB, 512MB, and 1G 184-pin 2.5V
DDR SDRAM DIMM
x 1
