- 13 -
Step 2.
Set Jumpers
This mainboard is jumperless! The default jumper settings have been set for
the common usage standard of this mainboard. Therefore, you do not need to
reset the jumpers unless you require special adjustments as in any of the
following cases:
1. Clear CMOS setting
2. CPU frequency select
For first-time DIY system builders, we recommend that you do not change the
default jumper settings if you are not totally familiar with mainboard configura-
tion procedures. The factory-set default settings are tuned for optimum system
performance. For the advanced users who wish to customize their system,
section 3.2 Jumper Settings will provide detailed information on how to
configure your mainboard manually.
Step 3.
Install DDR SDRAM System Memory
To install memory, insert DDR SDRAM memory module(s) in DIMM slot(s).
Note that DDR SDRAM modules are directional and will not go in the DIMM
slots unless properly oriented. After the module is fully inserted into the
DIMM slot, lift the clips of both sides of the DIMM slot to lock the module in
place.
DDR SDRAM
