- 9 -
-
I/O Interface
Provides a variety of I/O interfaces:
Ø
1 x Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø
1 x PS/2 mouse connector.
Ø
1 x PS/2 Keyboard connector.
Ø
1 x DB9 Serial connectors 16550 UART compatible.
Ø
1 x DB25 Parallel port supporting Standard Parallel Port (SPP),
Enhanced Parallel Port (EPP), and Extended Capabilities Port (ECP)
data transmission schemes.
Ø
4 x USB connection.
Ø
1 x RJ45 LAN connection. (AK32VN only)
Ø
1 x Line-Out port.
Ø
1 x Line-In port.
Ø
1 x Mic-In port.
-
6 USB2.0 Supported Onboard
Ø
4 USB connectors on back-panel and 2 sets of dual USB ports headers on
mid-board.
-
PCI Bus Master IDE Controller Onboard
Two UltraDMA 133/100/66/33 Bus Master Dual-channel IDE ports provide
support to a maximum of four IDE devices (one Master and one Slave per chan-
nel). The IDE Bus implements the data transfer speed up to 133/100/66/33
MB/sec and also supports Enhanced PIO Modes 0~4.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.
-
ATX Power Supply Connector
ATX power supply unit can be connect to the onboard 20-pin ATX power
connector, supporting Suspend and Soft-On/Off by dual-function power
button.
-
Advanced Configuration and Power Interface
Features four power saving modes: Snoop, Suspend to Disk, and Soft-Off.
ACPI provides more efficient Energy Savings Features controlled by your
operating system that supports OS Direct Power Management (OSPM) func-
tionality.
