- 31 -
ATX Power Supply Connector
Locate the 20-pin male header ATX power connector on your mainboard.
Plug the power cable from the ATX power supply unit directly into ATX
power supply connector.
Note 1:
The ATX power connector is directional and will not go in
unless the guides match perfectly making sure that pin#1 is
properly positioned.
Note 2:
Make sure the latch of the ATX power connector clicks
into place to ensure a solid attachment.
Note 3:
This mainboard requires an ATX power supply of at least
200 watts with power good signal.
Wake-on LAN Connector (J10)
Attach a 3-pin connector from the LAN
card which supports the Wake-On-LAN
(WOL) function. This function lets users
wake up the connected system through
the LAN card.
17
18