Shuttle AI61 User Manual Download Page 2 | Manualshive

Page: 2 / 69

background image

M334

AI61

AMD K7 processor based AGPset Mainboard
Manual Version 1.1

Disclaimer

The manufacturer makes no representations or warranties regarding the contents of this
manual. Information in this manual has been carefully checked for reliability; however, no
guarantee is given as to the correctness of the contents. In the interest of continued product
improvement, this company reserves the right to revise the manual or include changes in the
specifications of the product described within it at any time without notice and without obliga-
tion to notify any persion of such revision or changes. The information contained in this
manual is provided for general use by the customers.

Trademarks

AMD is a registered trademarks of AMD Corporation.

PS/2 is a registered trademark of IBM Corporation.

AWARD is a registered trademark of Award Software Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice:

Other brand and product names used herein are for identification

purposes only and may be trademarks of their respective owners.

«
1
2
3
4
...
»

Summary of Contents for AI61






































































Reviews:

No comments

Related manuals for AI61

Brand: u-blox Pages: 2

Brand: Intel Pages: 113

Brand: SmartOne Pages: 2

Brand: Parker Pages: 56

Brand: ASROCK Pages: 2

Brand: Commell Pages: 60

Brand: Kontron Pages: 105

Brand: COX Pages: 60

Brand: MSI Pages: 90

Brand: Gigabyte Pages: 108

Brand: TYAN Pages: 67

Brand: TYAN Pages: 66

Brand: BCM Pages: 3

Brand: ASROCK Pages: 31

RouterBOARD M11 Series

Brand: MikroTik Pages: 3

Brand: TYAN Pages: 49

Tomcat K8S S2850

Brand: TYAN Pages: 60

Brand: TYAN Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands