- 33 -
Speaker Connector (SPEAKER)
Attach the PC speaker cable from the case to the 4-pin speaker connector
(SPEAKER).
Green LED Connector (GLED)
The Green LED (GLED) Indicates that the system in currently in one of the power
saving modes (Doze/Standby/Suspend). When the system resumes to normal
operation mode, the Green LED will go off. Attach a 2-pin Green LED cable to
the GLED header.
ATX Power On/Off Switch Connector (PWRON)
The Power On/Off Switch is a momentary type switch used for turning on or off
the system ATX power supply. Attach the connector cable from the Power Switch
to the 2-pin (PWRON) header on the mainboard.
C5
C6
Note : Please notice all the LED connectors are directional. If your chassis’s LED does
not light up during running, please simply change to the opposite direction.
1
Front Panel
SPEAKER EPMI RST HLED
- +
PWR
LED
- +
PWR
ON
GLED
+ -
1
1
Front Panel
SPEAKER EPMI RST HLED
- +
PWR
LED
- +
PWR
ON
GLED
+ -
1
C4
1
Front Panel
SPEAKER EPMI RST HLED
- +
PWR
LED
- +
PWR
ON
GLED
+ -
1
