- 41 -
3.3 System Memory Configuration
The AB60N mainboard has four 184-pin DIMM slots that allow you to install
from 64MB up to 4GB of system memory. Each 184-pin DIMM (Dual In-line
Memory Module) Slot can accommodate 64MB, 128MB, 256MB, 512MB, and
1GB of PC2100, PC2700 or PC3200 compliant 2.5V single (1 Bank) or double
(2 Bank) side 64-bit wide data path DDR SDRAM modules.
Install Memory:
Install memory in any or all of the slots and in any combination shown as
follows.
Note: Maximum installed memory is 4GB.
Note : You do not need to set any jumper to configure memory since the BIOS
utility can detect the system memory automatically. You can check the
total system memory value in the BIOS Standard CMOS Setup menu.
Don't support double-sided X16 DDR DIMMs.
Density
128Mbit
256Mbit
512Mbit
Device
Width
x8
x16
x8
x16
x8
x16
Single/
Double
SS/DS
SS/DS
SS/DS
SS/DS
SS/DS
SS/DS
184pin
DDR
DIMMs
128/256MB
64MB/NA
256/512MB
128MB/NA
512/1024MB
256MB/NA
