- 64 -
Soft-Off by PWR-BTTN
Under ACPI(Advanced Configuration and Power management Inter-
face) you can creat a software power down. In a software power down,
the system can be resumed by Wake Up Alarms. This item lets you
install a software power down that is controlled by the power button
causes a software power down. If the item is set to Delay 4 Sec., then
you have to hold the power button down for four seconds to cause a
software power down.
Ø
The choice: Instant-Off or Delay 4 Sec..
Wake Up by PCI card
When this item is enabled, the system power will be turned on if there is
any PCI card activity.
Ø
The choice: Enabled or Disabled.
Power On by Ring
If this item is enabled, it allows the system to resume from a software
power down or a power-saving mode whenever there is an incoming
call to an installed fax/modem. You have to connect the fax/modem to
the mainboard.
Ø
The choice: Enabled or Disabled.
Resume by Alarm
When this item enabled, you can set the date and time at which the
RTC (real-time clock) alarm awakens the system from Suspend mode.
Ø
The choice: Disabled or Enabled.
Data (of Month) Alarm
This item selects the alarm date.
Ø
Key in a DEC number:Min=0, Max=31.
Time (hh:mm:ss) Alarm
This item selects the alarm Time.
[hh]
Ø
Key in a DEC number:Min=0, Max=23.
[mm/ss]
Ø
Key in a DEC number:Min=0, Max=59.
