Shure Incorporated
35/63
1.
2.
3.
1.
2.
3.
4.
IP Address Configuration
An IP address must be assigned to each device in the network to ensure communication and control between components.
Valid IP addresses can assigned automatically using a DHCP server or manually from a list of valid IP addresses. If using
Dante audio, a separate Dante IP address must also be assigned to the receiver.
Automatic IP Addressing
If using a DHCP capable Ethernet switch, set the DHCP switch to ON.
Set the IP Mode to Automatic for all receivers:
DEVICE
UTILITIES
>
NETWORK
>
SHURE
CONTROL
>
NETWORK
Use the control wheel to set the mode to Automatic, press ENTER to save.
Note:
Use only one DHCP server per network.
Manual IP Addressing
Connect the receivers to an Ethernet switch.
Set the IP Mode to Manual for all devices:
DEVICE
UTILITIES
>
NETWORK
>
SHURE
CONTROL
>
NETWORK
Use the control wheel to set the mode to Manual.
Set valid IP addresses and subnet values for all devices, press ENTER to save.
Dante IP Addressing
IP addresses for a Dante network can assigned automatically using a DHCP server or manually from a list of valid IP address
es
To select the Dante IP addressing mode (Automatic or Manual):
DEVICE
UTILITIES
>
NETWORK
>
DANTE
>
AUDIO
&
CNTRL
Use the control wheel to select the mode, and then press ENTER to save.
Networking Acronyms
DHCP:
Dynamic Host Configuration Protocol
LAN:
Local Area Network
MCU:
Micro Controller Unit
RJ45:
Ethernet Connection
RX:
Receiver
TX:
Transmitter
WWB6:
Wireless Workbench 6 Software
VLAN:
Virtual Local Area Network
MAC:
Machine Access Code
