Shure Incorporated
10/63
◦
◦
◦
◦
◦
Indicate antenna status:
Blue = normal RF signal between the receiver and transmitter
Red = interference detected
Off = No RF connection between the receiver and transmitter
Note:
the receiver will not output audio unless one blue LED is illuminated.
⑪
RF Signal Strength LEDs
Indicate the RF signal strength from the transmitter:
Amber = Normal (-90 to -70 dBm)
Red = Overload (greater than -25 dBm)
⑫
Audio LEDs
Indicate average and peak audio levels:
LED
Audio Signal Level
Description
Red (6)
-0.1 dBFS
Overload/ limiter
Yellow (5)
-6 dBFS
Normal peaks
Yellow (4)
-12 dBFS
Green (3)
-20 dBFS
Signal Present
Green (2)
-30 dBFS
Green (1)
-40 dBFS
Note:
In Frequency Diversity mode, simultaneous blinking of the red and yellow audio LEDs indicates that diversity audio has been routed to this channel.
⑬
Gain Buttons
Press the ▲▼
gain buttons on the front of the receiver to incrementally adjust gain from -18 to +42 dB.
⑭
Power Switch
Powers the unit on or off.
Back Panel
①
AC Power Input
IEC Connector, 100 - 240 V AC.
②
RF Antenna Diversity Input Jack (2)
