![background image](http://html.mh-extra.com/html/shure/ulx-d/ulx-d_user-manual_1262482008.webp)
8
Menu Screens
Receiver Channel
① Receiver Information
Use
DEVICE UTILITIES
>
HOME INFO
to change the home screen display.
② Gain Setting
−18 to +42 dB, or Mute.
③ Mic. Offset Indicator
Indicates offset gain is added to the transmitter.
④ Transmitter Settings
The following information cycles when a transmitter is tuned to the receiver's
frequency:
- Transmitter Type
- Input Pad (Bodypack only)
- RF Power Level
- Transmitter Lock Status
- Transmitter Mute Status
⑤ Battery Runtime Indicator
Shure SB900 battery: runtime is displayed in minutes remaining.
AA batteries: runtime is displayed with a 5-bar indicator.
⑥ TV Channel
Displays the TV channel that contains the tuned frequency.
⑦ High Density Mode Icon
Displayed when High Density mode is enabled.
Transmitter Status
The following text or icons report transmitter status to the receiver screen:
Display Icon
Transmitter Status
Bodypack input is attenuated 12 dB
Offset gain is added to the transmitter
Lo
1 mW RF power level
Nm
10 mW RF power level
Hi
20 mW RF power level
M
Menu is locked
P
Power is locked
TxMuted
Displayed when the transmitter audio is set to off using the
MUTE MODE
feature
-No Tx-
No RF connection between a receiver and transmitter or trans-
mitter OFF
Transmitter
[
1
2
3
4
5
6
7
8
9
① Transmitter Information
Scroll ▲▼ at the home screen to change the display
② Power Lock Indicator
Indicates power switch is disabled
③ Transmitter Audio Muted Indicator
Displayed when the transmitter audio is set to off using the
MUTE MODE
feature.
④ Battery Runtime Indicator
- Shure SB900 battery: runtime is displayed in hours:minutes remaining
- AA Batteries: runtime is displayed with a 5-bar indicator
⑤ Menu Lock Indicator
Indicates menu navigation buttons are disabled
⑥ Mic. Offset
Displays microphone offset gain value
⑦ RF Power
Displays RF power setting
⑧ Bodypack Input Pad
The input signal is attenuated 12 dB
⑨ Encryption Icon
Indicates encryption is enabled on the receiver and has been transferred to the
transmitter from a sync
Press the ▲▼
gain
buttons on the front of the receiver to incrementally ad-
just gain from -18 to +42 dB.
Adjusting Gain
System Gain Control
The gain control on the receiver sets the audio signal level for the entire system. This al-
lows adjustments to be made during a live performance. It is not necessary to change the
gain on the transmitter (mic offset) to optimize the gain structure. Any required changes to
gain should be made from the receiver.