![background image](http://html.mh-extra.com/html/shure/scm820-digital-intellimix/scm820-digital-intellimix_user-manual_1262533022.webp)
20
1) Channel Name
Channel names can be customized with up to 31 any characters in length
except ‘=’,’.’ or ‘@’.
2) Source
Sets the audio input to one of two sources:
• Analog (default): Audio is from a microphone or line-level audio source
connected to a channel input on the mixer back panel.
• Network: Audio is from the Dante digital audio network. Dante Controller
software is required to properly route audio to the channel inputs.
3) Input Gain Level
Selects the analog input gain level for each channel.
• Mic (+46 dB): For less sensitive microphones such as dynamics.
• Mic (+26 dB): For loud talkers or sensitive microphones such as
condensers.
• Line (+0dB): For line-level sources such as mixer inserts.
Note: Gain is disabled when the audio source is set to Network.
4) Phantom Power (+48V)
When selected, the button illuminates blue to indicate 48 V phantom
power is supplied to the microphone. Use this setting for condenser
microphones.
Note: Disabled when Input Gain Level is set to Line (+0dB) or Network is
selected for the audio source .
5) Low Cut
Ideal for attenuating low-frequency vibration caused by table vibrations
or air-conditioning rumble. Adjust the frequency of the 12 dB/octave filter
from 25 - 320 Hz.
6) High Shelf
For tempering sibilant speech or enhancing the sound of off-axis
microphones. Use this to boost or cut the signal by 12 dB at 5 kHz.
7) Channel On Indicators
The two indicators illuminate green when the channel is open to that mix
bus (Mix A or Mix B). When set to Dual Mixer, the A and B indicators
function separately for each mix.
8) Clip Indicator
Illuminates when the signal is clipping the input preamp. The light will stay
lit as a warning for 2 seconds. Select a lower Input Gain Level to avoid
clipping.
Input
9) Input Meter
Displays signal level information. The meter is customizable in the
Preferences tab to monitor the following options:
• Realtime monitoring of the input signal level (default) or IntelliMix Gain
attenuation.
• Pre- or post-fader Input signal level.
• VU + Peak (default), Peak, or VU metering of input signal level.
10) Channel Fader and Gain Value
Adjusts the channel volume from -110 dB to +18 dB.
11) Group (Fader and Mute)
Each channel can join a fader or mute group, which enable the
adjustment of several channels at once. There is one Fader and one
Mute group for each Link Group.
12) Mute Button
Mutes the audio for that channel. A muted channel still can still be soloed
to the headphones for monitoring. Channel Mute Control can be set to
one of two places from the IntelliMix tab:
• Pre-IntelliMix: Audio is muted before MaxBus or IntelliMix decisions.
• Post-IntelliMix: Audio is muted after contributing to IntelliMix and Maxbus
decisions.
13) Solo Button
Solos the selected channel to the headphone jack for monitoring.
14) Aux Routing
Routes the aux channel to the selected mix output. The aux channel
routes without automixing to the mix outputs.
15) Aux Link Mode
Defines the aux channel routing when the device is in a Link Group:
• Global (default): Aux audio appears at the outputs of all linked mixers.
• Local: Aux audio appears only at that mixer’s output.
16) Copy Channel
Copies the selected channel’s Input settings to the device or to the entire
Link Group.
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
①
②
③
④
⑮