![background image](http://html1.mh-extra.com/html/shure/sbc250/sbc250_manual_1261326005.webp)
Shure Incorporated
5/12
⑧
Charging Status LEDs
Each charging slot has five LEDs that illuminate to show the battery's charge level:
LED
% Battery Charge
1
•
Flashing: <10%
•
Solid: >10%
2
>25%
3
>50%
4
>75%
5
100%
⑨
Reset Button
• Docking station reset: Press and hold reset button while simultaneously powering on the docking station to re
store factory settings. IP addressing will be reset to Automatic. Charging LEDs = solid green.
•
Transmitter reset: Place transmitters in charging docks. Press and hold reset button for five seconds to restore
transmitter factory settings. Transmitter mute LEDs = flashing.
⑩
ID Button
Identifies devices shown in Wireless Workbench by causing both the device's LED and the corresponding icon in
WWB to flash.
Power Connections
1. Connect power supply to a power outlet and to the docking station power input.
2. The docking station turns on and off via toggle switch.
If the docking station loses power, transmitters will also power off.
Connecting Transmitters
Insert a ULXD6 or ULXD8 transmitter with Shure rechargeable batteries into the slot as shown: