6
Adjusting Gain
PGX1
PGX2
PGXD
Single System Setup
Scan
Use the scan feature on the receiver to find a
clear channel.
LED screen displays current
channel
press
channel
button to scan for a
clear channel
system scans for the channel with the
least interference
Synchronize
Synchronize the transmitter to the receiver by aligning the
infrared (IR) ports and pressing the
sync
button. Make sure
the IR ports are closely aligned.
After a successful sync, the transmitter LED momentarily
flashes red and the receiver ready light illuminates.
Three gain settings are available on the PGX1. Choose the appropri-
ate setting for your instrument.
• mic: Microphone (higher amplification)
• 0: Guitar with passive pickups (medium amplification)
• –10: Guitar with active pickups (lower amplification)
If the receiver LED indicates the input volume is overloading the re
-
ceiver, try switching the gain to a lower setting.
Access the gain adjustment switch by unscrewing the head of the
microphone.
Two gain settings are available on the PGX2. Use the tip of a pen or
a small screwdriver to move the switch.
• 0dB: For quiet to normal vocal performance.
• –10dB: Use only if audio is distorted due to high voal levels.
channel
channel
sync
ready
audio
channel
select
< 15 cm (8 in.)
or
sync
BIAS
AUDIO
0dB
-10dB
AUDIO
0dB
-10dB
0
-10dB
mic
0
-10dB
mic
Summary of Contents for PGX Wireless System
Page 2: ...Copyright 2010 Shure Incorporated Printed in U S A XXXXXXX ...
Page 3: ......
Page 47: ......