Shure PGX Wireless System, Quick Start Manual

Page: 10 / 48

10
PGX4
Dimensions 40 mm X 181 mm X 104 mm (H x W x D)
Weight 327 g (11.5 oz.)
Housing ABS
Sensitivity -105 dBm for 12 dB SINAD, typical
Image Rejection >70 dB, typical
Power Requirements 12–18 V DC @ 150 mA, supplied by external power supply (tip positive)
Configuration Impedance balanced
Audio Output Level
Ref. ±33 kHz deviation, 1 kHz tone
XLR connector: –19dBV (into 600 Ω load)
6.35 mm (1/4”) connector: –5dBV (into 3 kΩ load)
Impedance XLR connector: 200 Ω
6.35 mm (1/4”) connector: 1 kΩ
Pin Assignments XLR connector: 1=ground, 2=hot, 3=cold
6.35 mm (1/4”) connector: Tip=audio, Ring=no audio,
Sleeve=ground
Frequency Range and Transmitter Output Level
Band Range Output
Power
H6 524 to 542 MHz 30 mW
J6 572.250 to 590.875 MHz 30 mW
K5E 606 to 630 MHz 10 mW
L5 644 to 662 MHz 30 mW
P6 702.200 to 719 MHz 30 mW
R1 800 to 820 MHz 20 mW
T1 846 to 865 MHz 10 mW
Q8 740 to 752 MHz 10 mW
JB 806 to 810 MHz 10 mW
R14 794 to 806 MHz 20 mW
R19 794 to 806 MHz 10 mW
X5 925 to 932 MHz 10 mW
G4 470.125 to 493.825 MHz 30 mW
G8 494.200 to 509.825 MHz 30 mW
Q24 736 to 754 MHz 30 mW
NOTE:
This Radio equipment is intended for use in musical
professional entertainment and similar applications.
This Radio apparatus may be capable of operating on some
frequencies not authorized in your region. Please contact
your national authority to obtain information on authorized
frequencies and RF power levels for wireless microphone
products.