Shure Incorporated
68/93
•
•
•
1.
2.
3.
4.
Receiving Audio from a Device Using a Different Audio Network Protocol
Third-party devices:
When the hardware supports SAP, flows are identified in the routing software that the device uses.
Otherwise, to receive an AES67 flow, the AES67 session ID and IP address are required.
Shure devices:
The transmitting device must support SAP. In Dante Controller, a transmit device (appears as an IP address)
can be routed like any other Dante device.
Voting
The chairperson controls voting sessions from the conference unit or the voting tab in the chairperson web application view.
Use the web application to customize voting session settings, such as:
Enter a vote subject that will appear above the voting buttons and results, if desired
Exclude participants from the voting session, if desired
Choose 1 of the 6 voting configurations
To start a voting session:
Choose a voting configuration.
Press Start.
A voting screen displays on all conference units, and participants with voting rights can cast their votes using the
touchscreen.
Press Stop to end the voting session.
Voting Configurations
In an open vote a participant’s selection remains visible and interim vote results are shown.
In a secret vote there is no visible indication of how a participant voted and interim vote results are not shown.
Voting Configuration
Conference Unit Screen
2-Button (Open)
2-Button (Secret)
A 2-Button vote allows the participant to select either
“Yes” or “No.”
