Shure Incorporated
57/93
•
•
•
•
•
1.
◦
◦
2.
3.
1.
2.
Bila perlu, mungkin bisa membuang fungsi AGC dengan landasan saluran demi saluran. Hal ini mungkin dilakukan dengan
menonaktifkan AGC saluran, dan kemudian secara manual menyesuaikan level input dengan fader saluran yang sesuai.
Aktifkan atau nonaktifkan AGC dengan salah satu cara berikut:
Masuk ke
Audio
>
Mikrofon
aktif
dan klik tombol AGC.
Pilih perangkat yang diinginkan dari tab Perangkat dan centang kotak Aktifkan AGC.
Untuk input analog dan Dante, masuk ke
Audio
>
Input
dan klik tombol AGC.
Menambahkan Sumber Lain ke Gabungan Suara Ruang
Menambahkan sumber audio lain agar bercampur dengan gabungan suara mikrofon nirkabel MXCW.
1 input analog XLR pada titik akses secara otomatis diarahkan ke lantai
10 saluran jaringan digital Dante dapat dipilih untuk perutean
Hubungkan sumber suara ke sistem:
Input analog: Hubungkan sumber audio ke input XLR pada titik akses.
Tips:
Balik sakelar pengangkatan ground jika suara berdengung atau menggumam terjadi karena loop ground.
Audio digital: Arahkan audio ke salah satu saluran Dante MXCW menggunakan perangkat lunak Pengendali Dante.
Pastikan sumber dipilih pada kelompok suara ruang.
Jika perlu, sesuaikan level volume atau EQ agar sesuai dengan level input lainnya
Audio
>
Input
.
Tip:
Selalu gunakan AGC on each channel for automatic, continuous volume optimization.
Removing a Microphone from the Floor
By default, the audio from any active microphone is routed to the floor mix. However, you can remove a conference unit from
the floor mix if you do not want it to go to the loudspeakers.
For example, a chairperson's conference unit can be recorded but kept private (taken out of the floor mix). Remove it from the
floor mix and route it to another group that is connected to a recording system for archival purposes.
Go to
Audio
>
Group mixes
>
Floor
.
Find the seat you want to remove and deselect it.
Tip:
Select
Show connected seats only
to filter out unoccupied seats.