![background image](http://html1.mh-extra.com/html/shure/mxa920/mxa920_manual_1261986005.webp)
Shure Incorporated
5/44
4.
◦
◦
◦
5.
1.
2.
3.
Check the audio routes and settings to make sure they fit your needs. You might need to:
Delete unnecessary routes.
Verify that AEC reference signals are correctly routed.
Fine-tune DSP blocks as needed.
Send audio from the P300 to other sources using the matrix mixer. A common destination is a computer connected by
USB with conferencing software.
Step 3: Add Coverage
The default setting is a 30 by 30 foot (9 by 9 meter) dynamic coverage area. Any talker inside has coverage, and anything out
side that area won't be picked up.
To add more coverage areas:
Go to
[Your
room]
>
Coverage
map
and select the MXA920.
Select
Add coverage
and choose a dynamic or a dedicated coverage area. You can add any combination of up to 8
coverage areas per microphone. Move and resize as needed.
Set up a way to listen to the microphone directly (
, for example). Place a test call with the
whole conferencing system. Adjust gain and DSP as needed to get a good room sound.