![background image](http://html1.mh-extra.com/html/shure/mxa920/mxa920_manual_1261986029.webp)
Shure Incorporated
29/44
•
•
•
See
Dante Domain Manager's documentation
Dante Flows for Shure Devices
Dante flows get created any time you route audio from one Dante device to another. One Dante flow can contain up to 4 audio
channels. For example: sending all 5 available channels from an MXA310 to another device uses 2 Dante flows, because 1
flow can contain up to 4 channels.
Every Dante device has a specific number of transmit flows and receive flows. The number of flows is determined by Dante
platform capabilities.
Unicast and multicast transmission settings also affect the number of Dante flows a device can send or receive. Using multi
cast transmission can help overcome unicast flow limitations.
Shure devices use different Dante platforms:
Dante Platform
Shure Devices Using Plat
form
Unicast Transmit Flow
Limit
Unicast Receive Flow Limit
Brooklyn II
ULX-D, SCM820, MXWAPT,
MXWANI, P300, MXCWAPT
32
32
Brooklyn II (without SRAM)
MXA920, MXA910, MXA710,
AD4
16
16
Ultimo/UltimoX
MXA310, ANI4IN, ANI4OUT,
ANIUSB-MATRIX, ANI22,
MXN5-C
2
2
DAL
IntelliMix Room
16
16
Learn more about Dante flows in our FAQs
.
AES67
AES67 is a networked audio standard that enables communication between hardware components which use different IP au
dio technologies. This Shure device supports AES67 for increased compatibility within networked systems for live sound, inte
grated installations, and broadcast applications.
The following information is critical when transmitting or receiving AES67 signals:
Update Dante Controller software to the newest available version to ensure the AES67 configuration tab appears.
Before turning encryption on or off, you must disable AES67 in Dante Controller.
AES67 cannot operate when the transmit and receive devices both support Dante.
Shure Device Supports:
Device 2 Supports:
AES67 Compatibility
Dante and AES67
Dante and AES67
No. Must use Dante.
Dante and AES67
AES67 without Dante. Any other au
dio networking protocol is acceptable.
Yes
Separate Dante and AES67 flows can operate simultaneously. The total number of flows is determined by the maximum flow
limit of the device.