![background image](http://html1.mh-extra.com/html/shure/mxa920/mxa920_manual_1261986032.webp)
Shure Incorporated
32/44
2.
3.
4.
5.
6.
1.
2.
Remove one side of the frame as in step 1.4. Slide the grille back into the frame.
Attach the remaining side of the frame and secure it with the 4 screws.
Attach the LED lightpipe to the black plastic guide piece.
Align the LED with the lightpipe and put the main assembly back in place on the frame.
Note:
The label on the assembly is in the corner that corresponds to the LED.
Install 6 screws per side to secure the main assembly to the frame. Do not over-tighten.
Painting Round Array Microphones
The grille and back cover of round array microphones can be painted to blend in with a room's design.
Step 1: Remove and Paint the Grille
Loosen the set screw that connects the grille to the back cover. Turn the microphone over.
Rotate the grille as shown to release it from the back cover. Lift it up and out of the tabs holding it in place.