![background image](http://html.mh-extra.com/html/shure/microflex-mxcw/microflex-mxcw_manual_1261955083.webp)
Shure Incorporated
83/86
1.
2.
3.
4.
1.
2.
•
•
•
•
Warning:
Before charging, make sure the product is at room temperature, between 0 to 45°C (32 to 113°F).
經審驗合格之射頻電信終端設備
,
非經許可
,
公司
、
商號或使用者均不得擅自變更頻率
、
加大功率或變更原設計之特性及
功能
。
射頻電信終端設備之使用不得影響飛航安全及干擾合法通信
;
經發現有干擾現象時
,
應立即停用
,
並改善至無干擾時方得
繼續使用
。
所謂合法通信
,
係指依電信法規定作業之無線電信
。
輸入
、
製造射頻電信終端設備之公司
、
商號或其使用者違反本辦法規定
,
擅自使用或變更無線電頻率
、
電功率者
,
除依電
信法規定處罰外
,
國家通訊傳播委員會並得撤銷其審驗合格證明
。
減少電磁波影響
,
請妥適使用
Information to the user
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa
tion. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The equipment is intended to be used in professional audio applications.
Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment.
Note:
This device is not intended to be connected directly to a public internet network.
This equipment is for indoor use only.
Installation personnel: This product is designed for specific application and needs to be installed by qualified personnel with RF
and related rule knowledge. The general user shall not attempt to install, or to change the settings.
Certifications
EMC conformance to Environment E2: Commercial and Light Industrial. Testing is based on the use of supplied and recommended cable types. The use of
other than shielded (screened) cable types may degrade EMC performance.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20 cm between the radiator & your body.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.