Shure Microflex MXCW Manual Download Page 19

Page: 19 / 86

Shure Incorporated

19/86

•

Important Tips for Care and Storage of Shure Rechargeable Batteries

Proper care and storage of Shure batteries results in reliable performance and ensures a long lifetime.

Always store batteries and transmitters at room temperature

Ideally, batteries should be charged to approximately 40% of capacity for long-term storage

Periodically clean the battery contacts with alcohol to maintain ideal contact

During storage, check batteries every 6 months and recharge to 40% of capacity as needed

Networked Charging Station (MXCWNCS)

The MXCW networked charging station (MXCWNCS) provides charging and storage for up to ten SB930 rechargeable batter

ies. Installation options include mounting in a rack, to a wall, or on a table surface.

①

Status LED

Indicator

Description

Color

Status

Off

Off

Powered off

Green

Solid

Powered on

Flashing

Factory default reset in progress

Amber

Solid

Storage mode enabled

Flashing

Network reset in progress

Summary of Contents for Microflex MXCW























































































Search results

Summary of Contents for Microflex MXCW

Reviews:

Related manuals for Microflex MXCW

Brands by name

Popular brands

Shure Microflex MXCW, Manual

Search results

Summary of Contents for Microflex MXCW

Reviews:

Related manuals for Microflex MXCW

Brands by name

Popular brands