5
Get More Information
Now that the basic setup is complete, you should have access to the web
application and be able to pass audio between devices. More comprehen-
sive information is available online and in the help section, including:
• Maximizing audio quality with the built-in parametric equalizer
• External control system command strings
• Signal routing
• System scenario diagrams
• Software configuration
• Networking information
• Troubleshooting
• Replacement parts and accessories
The complete user guide is available at http://pubs.shure.com/guide/P300
USB Computer System
reset
input
output
usb
Computer
MXA310
Powered Loud-
speaker
Network Switch
(PoE+ Required)
1. Connect the computer to the USB port on the P300
2. Connect a powered loudspeaker or amplifier to the P300 analog
output 2. In the matrix mixer, this is labeled
Analog - To Speaker
.
3. In the P300 web application, open the matrix mixer
to make connections between devices.
Note:
Some connections are established in the matrix mixer by default. Refer to
the matrix mixer help topic in the web application for additional information.
Required Matrix Mixer Connections:
Input
Output
Automix
USB output
USB input
Analog - To Speaker
4. In the schematic view, right-click any AEC block and set
the AEC reference channel to
Analog - To Speaker
.
5. In the web application, adjust input and output levels
and perform a sound check. Refer to the help topics in
the web application for additional information.
Hardware Codec System
reset
input
output
usb
Video Codec
MXA910
Powered Loudspeaker
Network Switch
(PoE+ Required)
1. Connect the hardware codec audio output to the P300 analog
input 1. In the matrix mixer, this is labeled
Analog - From Codec
.
2. Connect the hardware codec audio input to the P300 analog
output 1. In the matrix mixer, this is labeled
Analog - To Codec
.
3. Connect a powered loudspeaker or amplifier to the P300 analog
output 2. In the matrix mixer, this is labeled
Analog - To Speaker
.
4. In the P300 web application, open the matrix mixer
to make connections between devices.
Note:
Some connections are established in the matrix mixer by default. Refer to
the matrix mixer help topic in the web application for additional information.
Required Matrix Mixer Connections:
Input
Output
Automix
Analog - To codec
Analog - From Codec
Analog - To Speaker
5. In the schematic view, right-click any AEC block and set
the AEC reference channel to
Analog - To Speaker
.
6. In the web application, adjust input and output levels
and perform a sound check. Refer to the help topics in
the web application for additional information.
Summary of Contents for INTELLIMIX P300
