background image

Note:

Use only with the included power supply or a Shure-approved equiva-

lent.

System Overview

GLX-D Advanced Digital Wireless Systems combine Automatic Frequency
Management technology with a rack mountable metal receiver, rechargeable
lithium-ion batteries, world-renowned microphones, and unparalleled design
and construction. New GLX-D Advanced Frequency Managers (available
separately) connect multiple GLXD4R receiver systems for increased channel
count and improved RF reliability, consolidating RF to one pair of antennas.
New antenna accessories help improve reception by letting you mount anten-
nas closer to transmitters, with directional reception for improved performance.
Available in a variety of bodypack and handheld configurations, GLX-D Ad-
vanced Digital Wireless sets the standard for ease of operation and digital
audio clarity.

Features

Exceptional digital audio clarity

Operates in globally unlicensed 2.4 GHz spectrum

Optional GLX-D Frequency Manager allows operation of up to 11 systems

New antenna accessories for remote mounting and improved reception

Half-rack size and metal chassis

Rechargeable batteries deliver cost efficiency and up to 16 hours of
runtime

Adjustable transmitter gain to optimize audio signal

Automatically moves away from interference without audio interruption

RF back-channel for remote control of transmitter functions

Automatic transmitter power-off to conserve battery life when transmitter
is not in use

Furnished Accessories

95A32436

Reverse SMA Bulkhead Adapters, lockwasher, nut (2)

UA802-RSMA

0.6 m (2 ft.) Reverse SMA Cable (2)

PS43

Power Supply

95B13528

UA8-2.4 GHz 1/2 Wave Antenna (2)

90AZ8100

Rack-mounting hardware kit

SB902

Shure Lithium-Ion Rechargeable Battery*

95A21651

USB Cable, Type A to Micro-B*

* Only included with GLXD14 or GLXD24 systems.

Optional Accessories

UA846Z2-LC

GLX-D Frequency Manager

PA805Z2-RSMA

Passive Directional Antenna 2.4 GHz

UA221-RSMA

Reverse SMA Passive Antenna Splitter (900 MHz

ISM, DECT, 2.4 GHz)

UA505-RSMA

Wall Mount for PA805Z2-RSMA and UA8-2.4GHZ

UA8-2.4GHZ

1/2 Wave Antenna, 45 deg. (2.4 GHz)

UA802-RSMA

0.6 m (2 ft.) Reverse SMA Cable

UA806-RSMA

1.8 m (6 ft.) Reverse SMA Cable

UA825-RSMA

7.6 m (25 ft.) Reverse SMA Cable

UA850-RSMA

15.2 m (50 ft.) Reverse SMA Cable

UA8100-RSMA

30.4 m (100 ft.) Reverse SMA Cable

95A32436

Reverse SMA Bulkhead Adapters

SBC10-902

Stand Alone Single Battery Charger

SBC-CAR

Car Battery Charger

Quick Start for Single Receiver

To reduce set-up time, the transmitter and receiver automatically link to form an audio channel the first time they are powered on and never have to be linked
again.

Shure Incorporated

GLXD4R

 Half-Rack Wireless Receiver

2017/11/28

2/20

Summary of Contents for GLXD14R





















Reviews: