background image

 

! IMPORTANT SAFETY INSTRUCTIONS !

1.

READ these instructions.

2.

KEEP these instructions.

3.

HEED all warnings.

4.

FOLLOW all instructions.

5.

DO NOT use this apparatus near water.

6.

CLEAN ONLY with dry cloth.

7.

DO NOT block any ventilation openings. Install in accordance with the manu-
facturer's instructions. 

8.

DO NOT install near any heat sources such as radiators, heat registers, stoves, 
or other apparatus (including amplifiers) that produce heat.

9.

DO NOT defeat the safety purpose of the polarized or grounding-type plug. A 
polarized plug has two blades with one wider than the other. A grounding type 
plug has two blades and a third grounding prong. The wider blade or the third 
prong are provided for your safety. If the provided plug does not fit into your out-
let, consult an electrician for replacement of the obsolete outlet.

10.

PROTECT the power cord from being walked on or pinched, particularly at plugs, 
convenience receptacles, and the point where they exit from the apparatus.

11.

ONLY USE attachments/accessories specified by the manufacturer.

12.

13.

UNPLUG this apparatus during lightning storms or when unused for long periods of 
time.

14.

REFER all servicing to qualified service personnel. Servicing is required when the 
apparatus has been damaged in any way, such as power-supply cord or plug is dam-
aged, liquid has been spilled or objects have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does not operate normally, or has been 
dropped.

15.

DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled 
with liquids, such as vases, on the apparatus.

16.

The MAINS plug or an appliance coupler shall remain readily operable.

17.

The airborne noise of the apparatus does not exceed 70dB (A).

18.

Apparatus with CLASS I construction shall be connected to a MAINS socket outlet 
with a protective earthing connection.

19.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or 
moisture. 

20.

Do not attempt to modify this product. Doing so could result in personal injury 
and/or product failure.

USE only with a cart, stand, tripod, bracket, or table 
specified by the manufacturer, or sold with the 
apparatus. When a cart is used, use caution when 
moving the cart/apparatus combination to avoid 
injury from tip-over.

This symbol indicates that there are important operating and 
maintenance instructions in the literature accompanying this unit.

This symbol indicates that dangerous voltage constituting a 
risk of electric shock is present within this unit.

WARNING:

 Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The 

safety certifications do not apply when the operating voltage is changed from the factory setting.

! CONSIGNES DE SÉCURITÉ IMPORTANTES !

1.

LIRE ces consignes.

2.

CONSERVER ces consignes.

3.

OBSERVER tous les avertissements.

4.

SUIVRE toutes les consignes.

5.

NE PAS utiliser cet appareil à proximité de l'eau. 

6.

NETTOYER UNIQUEMENT avec un chiffon sec.

7.

NE PAS obstruer les ouvertures de ventilation. Installer en respectant les con-
signes du fabricant.

8.

Ne pas installer à proximité d'une source de chaleur telle qu'un radiateur, une 
bouche de chaleur, un poêle ou d'autres appareils (dont les amplificateurs) pro-
duisant de la chaleur.

9.

NE PAS détériorer la sécurité de la fiche polarisée ou de la fiche de terre. Une 
fiche polarisée comporte deux lames dont l'une est plus large que l'autre. Une 
fiche de terre comporte deux lames et une troisième broche de mise à la terre. 
La lame la plus large ou la troisième broche assure la sécurité de l'utilisateur. Si 
la fiche fournie ne s'adapte pas à la prise électrique, demander à un électricien 
de remplacer la prise hors normes. 

10.

PROTÉGER le cordon d'alimentation afin que personne ne marche dessus et 
que rien ne le pince, en particulier au niveau des fiches, des prises de courant 
et du point de sortie de l'appareil.

11.

UTILISER UNIQUEMENT les accessoires spécifiés par le fabricant.

12.

13.

DÉBRANCHER l'appareil pendant les orages ou quand il ne sera pas utilisé pendant 
longtemps.

14.

CONFIER toute réparation à du personnel qualifié. Des réparations sont nécessaires 
si l'appareil est endommagé de quelque façon que ce soit, comme par exemple : cor-
don ou prise d'alimentation endommagé, liquide renversé ou objet tombé à l'intérieur 
de l'appareil, exposition de l'appareil à la pluie ou à l'humidité, appareil qui ne marche 
pas normalement ou que l'on a fait tomber.

15.

NE PAS exposer cet appareil aux égouttures et aux éclaboussements. NE PAS poser 
des objets contenant de l'eau, comme des vases, sur l'appareil.

16.

La prise SECTEUR ou un adaptateur d'alimentation doit toujours rester prêt(e) à être 
utilisé(e).

17.

Le bruit aérien de l'appareil ne dépasse pas 70 dB (A).

18.

L'appareil de construction de CLASSE I doit être raccordé à une prise SECTEUR 
dotée d'une protection par mise à la terre.

19.

Pour réduire les risques d'incendie ou de choc électrique, ne pas exposer cet 
appareil à la pluie ou à l'humidité.

20.

Ne pas essayer de modifier ce produit. Une telle opération est susceptible 
d'entraîner des blessures ou la défaillance du produit.

UTILISER uniquement avec un chariot, un pied, un trépied, 

un support ou une table spécifié par le fabricant ou vendu 

avec l'appareil. Si un chariot est utilisé, déplacer l'ensemble 

chariot-appareil avec précaution afin de ne pas le renverser, 

ce qui pourrait entraîner des blessures.

C

e symbole indique la présence d'une tension dangereuse dans 

l'appareil constituant un risque de choc électrique.

Ce symbole indique que la documentation fournie avec l'appareil contient 
des instructions d'utilisation et d'entretien importantes.

AVERTISSEMENT :

 Les tensions à l'intérieur de cet équipement peuvent être mortelles. Aucune pièce interne réparable par l'utilisateur. Confier toute réparation à du per-

sonnel qualifié. Les certifications de sécurité sont invalidées lorsque le réglage de tension d'usine est changé.

WARNING: 

This product contains a chemical known to the State of California to cause cancer and birth 

defects or other reproductive harm.

Summary of Contents for DFR22E














Reviews: