4
AXT620 Ethernet Switch
The AXT620 Ethernet Switch is a rugged, rack-mountable 9-port switch that simplifies the networking of Shure systems and minimizes network con-
figuration setup. It is equipped with Power over Ethernet (PoE) ports for enabled devices and a DHCP server to automatically assign IP addresses to
components.
Features
•
Rugged 1RU construction
•
Internal power supply
•
8 rear panel ports, 4 of which have Power over Ethernet (PoE)
•
Front panel port
•
On-board DHCP server
•
Easy system integration
Included Components
•
(1) PoE Managed Switch
•
(4) Rubber footpads
•
(1) Ethernet cable (10 ft.)
•
(1) Rack-mount kit
•
(1) Power Cord
Front and Rear Panel
① RJ-45 Ports
One 10/100 N-way auto-sensing for 10Base-T or 100Base-TX
connections.
② Front Panel LED Indicators
Link
•
Green: Connected to network
•
Blinking: Networking is active
•
Off: Not connected to network
100Mb
•
Amber: The port is operating at speed of 100 Mb
•
Off: The port is disconnected or not operating at speed of 100 Mb
PoE
•
Amber: The port is suppling power to the connected PoE device
•
Off: No powered device attached
③
DHCP
Switch
Turns the DHCP server ON or OFF (Left side = On, Right side = Off)
④
Power
•
Green: Power on
•
Off: No AC power applied
⑤ Power cord socket
The switch will work with AC in the voltage range of AC 100-240V
with frequency of 50-60Hz.
⑥ RJ-45 Ports
Eight 10/100 N-way auto-sensing for 10Base-T or 100Base-TX
connections. Ports 5-8 also can supply power over Ethernet to
enabled-devices.
⑦ Rear Panel LED Indicators
Link
(port 1 ~ 8)
•
Green: Connected to network
•
Blinking: Networking is active
•
Off: Not connected to network
100Mb
(port 1 ~ 4)
•
Amber: The port is operating at speed of 100 Mb
•
Off: The port is disconnected or not operating at speed of 100 Mb
PoE
(port 5 ~ 8)
•
Amber: The port is suppling power to the connected PoE device
•
Off: No powered device attached
⑧ System information sticker
Displays the MAC address.
⑨
Reset
button
Reboots the system. If you press the
Reset
button for over five
seconds, the system will reset to factory defaults.
POWER
AXT620
Ethernet
Switch
LINK
LINK
LINK
10/100Mb
10/100
10/100 & PoE
100Mb
100Mb
PoE
1
2
3
4
5
6
7
8
ON
OFF
DHCP
1
2
3
4
Power On
Connect the power cord to the power socket on the rear panel of the
switch.
Model Name: SHURE AXT620
MAC: 0011FC059C60
S/N: 65770110100015
LINK
10/100 Ethernet
100Mb
1
2
3
4
5
6
7
8
LINK
PoE
10/100 Ethernet W/PoE
R E S E T
Input: 100-240 V~ 50/60Hz 2A max.
5
6
9
7
8
AXT620 Ethernet Switch
Made in Taiwan
Rack-mount Installation
For proper ventilation, allow about at least four inches (10 cm) of clear-
ance on the front and 3.4 inches (8 cm) on the back of the switch. This is
especially important for enclosed rack installation.