manualshive.com logo in svg

Shure ANIUSB-Matrix, User Manual, Page: 8 / 39

Share
Download
Shure ANIUSB-Matrix User Manual Download Page 8

9/12/17, 8)20 AM

Shure Publications | User Guides | ANIUSB-Matrix

Page 8 of 39

http://pubs.shure.com/guide/ANIUSB-Matrix/en-US

input and output audio channels.

ɥ

 LED Indicators

Power: Power over Ethernet (PoE) present

Note: Note: Use a PoE injector if your network switch does not supply PoE.

Network: Network connection active

Network Audio: Dante audio present on the network

Note: Error details are available in the event log in the web application.

Network Audio LED Behavior

LED Status

Activity

Off

No active signal

Green

Device is operating
successfully

Red

Error has occurred. See
event log for details.

Encryption:

LED Status

Activity

Off

Audio not encrypted

Green

Successful encrypted audio
connection with another device

Red

Encryption error. Possible
causes:

Encryption is enabled on
one device and not on
another
Passphrase mismatch

ɦ

 Dante Network

Port

Connects to a network switch to receive Dante audio, Power over
Ethernet (PoE), and data from the control software.

ɧ

 Reset Button

Resets the device settings back to the factory default

Power Over Ethernet (PoE)

This device requires PoE to operate. It is compatible with both Class 0 and Class 3 PoE
sources.

Power over Ethernet is delivered in one of the following ways:

A network switch that provides PoE
A PoE injector device

Reset

The reset button is located inside a small hole in the rear panel. Use a paperclip or other

Summary of Contents for ANIUSB-Matrix








































Reviews:

No comments