manualshive.com logo in svg

Shure ANIUSB-Matrix, User Manual, Page: 1 / 39

Share
Download
Shure ANIUSB-Matrix User Manual Download Page 1

9/12/17, 8)20 AM

Shure Publications | User Guides | ANIUSB-Matrix

Page 1 of 39

http://pubs.shure.com/guide/ANIUSB-Matrix/en-US

ANIUSB-Matrix

Audio Network Interface

General Description

The ANIUSB-MATRIX Audio Network Interface provides connections for USB, Dante

™

, and

analog audio sources. Collaborate and connect with all audio devices on a single network,
with support for wireless microphones, computers, mobile devices, video codecs, and
loudspeaker systems. Connect with a single network cable to receive audio and power
through Power over Ethernet (PoE). A browser-based web application controls audio and
network settings from any computer connected to the same network.

Safety Information

IMPORTANT SAFETY INSTRUCTIONS

1.  READ these instructions.
2.  KEEP these instructions.
3.  HEED all warnings.
4.  FOLLOW all instructions.
5.  DO NOT use this apparatus near water.
6.  CLEAN ONLY with dry cloth.
7.  DO NOT block any ventilation openings. Allow sufficient distances for adequate

ventilation and install in accordance with the manufacturer’s instructions.

8.  DO NOT install near any heat sources such as open flames, radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat. Do not place any
open flame sources on the product.

9.  DO NOT defeat the safety purpose of the polarized or grounding type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wider blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

10.  PROTECT the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11.  ONLY USE attachments/accessories specified by the manufacturer.
12.  USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.

Publications

User Guides

ANIUSB-Matrix (English)

›

›

English

Table of Contents

General Description

Safety Information

Getting Started

Hardware and Installation

Device Identification

Signal Flow and Connections

Audio Settings

Using A Password

Networking and Dante

ANIUSB Command Strings

Troubleshooting

Important Product
Information

Specifications

Accessories

Summary of Contents for ANIUSB-Matrix








































Reviews:

No comments