manualshive.com logo in svg

Shure ANIUSB-Matrix, User Manual, Page: 3 / 39

Share
Download
Shure ANIUSB-Matrix User Manual Download Page 3

9/12/17, 8)20 AM

Shure Publications | User Guides | ANIUSB-Matrix

Page 3 of 39

http://pubs.shure.com/guide/ANIUSB-Matrix/en-US

Use Dante Controller software to connect with other Dante devices and pass audio
Access additional configuration information

Step 1: Connect to a Network

1.  Use an Ethernet cable (CAT5e or higher) to connect the ANIUSB-MATRIX to a network

switch.
Note: The network switch must provide Power over Ethernet (PoE). Make sure to
connect to a PoE port, since many switches do not supply power on all ports.

2.  Connect a computer to the network switch with an Ethernet cable

Step 2: Access the Web Application

1.  Download and install the Shure Device Discovery application (http://www.shure.com)
2.  Open the Shure Device Discovery application
3.  Double-click the device to open the web application.

Tip: If setting up multiple Shure devices, use the Identify button in the application to
flash the lights on the device.

Step 3: Connect Devices in Dante Controller Software

1.  Download and install Dante Controller Software from http://www.audinate.com
2.  Use Dante Controller to create connections with other Dante devices

Note: Refer to the Dante Controller user guide for more information on channel routing (available at
http://www.audinate.com/resources/technical-documentation)

Example: Connecting the ANIUSB-MATRIX and Shure MXA310

Summary of Contents for ANIUSB-Matrix








































Reviews:

No comments