Shur-Co SHUR COVER, Owner'S Manual

Page: 11 / 24

P/N 1127925 Rev. B
8
STEP 11 : Rotate web spool until yellow screw
M
can be installed
into holes on bottom of spool. Install screw and secure
with nut
U
.
Web Spool & Drive Motor - continued
STEP 10 : Push webbing and spacers back into spool and secure
with M8 x 120 cap screw and lock washer . Tighten
screws.
STEP 9: Route webbing through spool bracket web guide and
insert bushing spacers into loops.
spool
bracket
web guide
insert bush
-
ing spacers
into loops
webbing
STEP 8: Rotate web spool so M8 x 120 screw is facing forward .
Remove screw and loosen other two screws so two
bushing spacers can be removed .
web spool
remove
bushing
spacers
m8
x
120
cap screw
M
U
m8
x
120
cap screw