23
/ 27
Method to Add the Silicon Oil
As above Figure, tilt the treadmill at a angle of about 45 degrees.
Lift up the Running Belt with one hand, put some lubricating oil onto the running deck, let the lubricating
oil flow towards the other side of running deck. When the oil flows across the middle line, put the
equipment to horizontal direction.
Turn on the equipment, walk on the treadmill slowly for a few minutes, let the running belt being complete
attached of lubricating oil. Increase the speed and lubrication is finished.
Note
Do not put on too much lubricating oil once.
After lubricating, use a cloth to clean up the extra oil on the side and surface of the running belt.
Maintenance Instructions
1. In order to maintain the electric treadmill and prolong the service life of the treadmill, it is suggested that
users turn off the power after two hours use and let the treadmill free for 10 minutes before the usage.
Summary of Contents for X6
Page 1: ...User s Manual ...
