7
(1) 1 to 15 is the firing angle when Circle flamer running in half cycle mode.
(2) AMGS is the firing direction when running in full cycle mode, A is downward, M is upward, G is left side, S is right side.
For more detail please refer to angle definition in under full cycle mode.
(3) Audience side and control side are indicated in above picture.
(4) Safety distances for CIRCLE FLAMER are indicated in above picture. At least 15m in all projection directions, at least 5m
to the other sides of the device.
Immediately upon receiving the machine, carefully unpack the carton, check the machine received in good condition. Ensure
safety operation of machine, please do following below operation procedures when operate CIRCLE FLAMER.
Note: in order to indicate correct direction, please place the top panel correctly.
Before operate machine please locate safety
lock at TEST MODE.
TEST MODE:
operator can test the rotate of
nozzle, but the fuel ejection function disabled,
so there is no fuel eject and flames.
USER MODE:
the device can generate flames
normally. Please strictly follow the safety
distance requirement, remove all human,
animal or flammable objects in the danger area.
The device can only be placed horizon-
tally, if placed on truss, please locked
with extra safety ropes,Remove nozzle
protection cover if it exist.
Operation step
Schematic diagram and explanation
Explanation
1. Installation
2. Locate safety lock at
TEST MODE
Please fueling with high quality fuel according
to requirement of this manual.
3. Fueling
Two kind of power supply optional:
1. 110V/220V main power supply
2. 12V battery power supply
Please confirm safety lock located at TEST
MODE before switch on the POWER ON/OFF.
4. Power and DMX cable
connection
5. Switch ON the
machine
2. Quick Operation Sheet