21
MODEL
ZK6200
Dimension
390×300×110mm
Weight
3.5kgWork
Input
110-240Vac,
50/60Hz
Work
power
15w
Work
Temp.
-10
℃
~ 50
℃
Interface
2*CAN
port
2*
media
port
(music
trigger)
2*MIDI
port
(music
trigger)
1*
DMX512
input
1*DMX512
output.
Support Max. 200m communication cable
3350 mAH Li-battery (5h battery life when fully charged)
6. Operating with SHOWVEN host controller ZK6200/ZK6300
1) Hardware description
SHOWVEN host controller introduction
a) Standard DMX512 signal output.
b) Support 18units CIRCLE FLAMER (ZK6200) or 54units CIRCLE FLAMER (ZK6300) at the same time.
c) 5 standard dynamic modes: Synchronization, Center to Ends, Ends to Center, Left to Right, Right to Left. And an user defin
able Special Effect mode, support 8 files, each file support 36000 lines maximum (effects lasts for 30min).
d) Multi trigger sources: manual, music or midi input.
e) RDMX monitoring function: system can send back circle flamer working status info such as pressure, warming etc. and
display on the screen.
f) Emergency stop function.
• Example 3: Firing with DMX control (fixed firing duration, Half Cycle Mode)
1. Set nozzle straight up
(CH1 Angle = 128, CH2 Speed = 0, CH3 Ignition = 0, CH4 Firing duration = 0, CH6 Compression mode = 50~200)
2. Set firing duration 1s
(CH1 Angle = 128, CH2 Speed = 0, CH3 Ignition = 0, CH4 Firing duration = 100, CH6 Compression mode = 50~200)
3. Firing 1s
(CH1 Angle = 128, CH2 Speed = 0, CH3 Ignition = 255, CH4 Firing duration = 100, CH6 Compression mode = 50~200)
NOTE:
After firing, The DMX value of CH3 must fall below 254, before an ignition can be made again.