Responsibility Excellence Innovation
Power cable connection
：
Wireless remote control mode
：
Advanced menu
：
Use:
Page-5/8
Press “MENU” 3 seconds to enter the advanced setup interface, press MENU key to enter
different options, press MENU till 3 seconds to return to the main interface
.
》
For convenient use, there are power supply cable and power supply ex-cable. power
Supply ex-cable can achieve multiple devices connected, maximum cascade is 6pcs. All
power plugs are industrial plug with lock, it need to toggle snap and rotate when using.
》
If you use mobile power plate, be sure to use good quality and match rated power products.
6 pcs machines requires around 2000 watts, cores should be over 1.5 square.
》
If the remote control cannot work, please check whether wireless function was turn on.
Press MENU to switch to wireless control setting , menu is set to “ON” , press “ENTER”. This
interface can also be mactching code with remote controller.
》
Sparkular mini can controlled by both DMX and remote controller, when there are DMX
signal input, wireless remote controller will not work.
》
When using remote control you need to pull out the antenna.
Options
Range
500-610
ON/OFF
70-100
Factory Mode/
User Mode
ON/OFF
Instructions
Set Temperature
Setup inner Core temperature.
Auto Heat
Auto preheat function switch after turn on machine
Auto Heat
Adjust the sparks density.
Mode Selection
Factory Mode is factory debugging mode, User
Mode is using mode
Tip Over Error
Tilt function switch.
Default Parameter
Press “ENTER” to restore all parameters to the
factory settings.
