Showven Circle Flamer X-F1800, User Manual

Page: 2 / 24

1
CIRCLE FLAMER X-F1800
USER MANUAL
★
Please read this manual carefully before operating this product.
★ Warranty card attached in the manual, please keep it well.
▲
WARNING
• Unauthorized repair are prohibited, it may cause serious incident.
• Make sure power supply in consistent with the rated voltage of the equipment, and the socket must well grounded. Unplug
and turn off the machine when not use.
• Before connect the power cable, communication DMX cable should well connected and ensure the command keep at firing
OFF status. And safety lock stay at test mode.
• The device can only be placed horizontally. Safety distances are marked on the device (at least 15m in all projection direc
tions, at least 5m to the other sides of the device).
• After turning on the device, no person allows to stay in the danger area. Ensure all persons that are part of the show be
informed about the safety distance, risks and functions of the device.
• Always have a CO2 fire extinguisher and an extinguishing blanket in case of needed.
• If there be any doubt as to the safety operation of the device in any circumstances, the device should be taken out of service
immediately. Be sure the device is in good operating condition before use. If fail to fire correctly, immediately shut down
and check it accordingly.
• Be sure to use high quality flame fluid, otherwise, it is easily lead to failure or danger. Be careful when refill the flame fluid
tank. Please keep flame fluid away from heat source, sparks, fire or other possibility of ignition. Do not smoke!
• The operator responsible for the control of Circle Flamer must always have a clear view of the device, so that he/she can
stop the show immediately when there is danger. The main AC power switch should near operator. So that operator can
turn off the power of all devices in case of abnormal.
• The device shall not be altered and applied to other use purpose.
• Notes for use of Battery power supply: CIRCLE FLAMER X-F1800 with stable internal circuit design, please support X-F1800
with battery voltage higher than 12V. The driving speed of motor won’t change because of the decrease of battery power
supply. Battery options: 12V lead-acid battery (above 30AH, with more than 24h standby). For Lithium battery, please use
battery with output above 30A. Socket type: NEUTRIK-NL4FX, 4 pin sound coupliers (1+ connect 12V anode, 1- connect
12V cathode). Connecting power cables should above 14AWG.
▲
Foreword
Thanks for choosing SHOWVEN CIRCLE FLAMER X-F1800. Please read following manual carefully and completely before
operating this product. Operate according to instructions is very important for safety, and can elongate the service life of the
machine.
Strictly follow the instruction in the manual when operate Circle flamer X-F1800. If you have any doubts, please contact
SHOWVEN technologies Co., Ltd by info@showven.cn.
We assume the person who use or come in contact with the device are familiar with how the device should be handled. This
includes proper use, maintenance and repair of the machine as defined in this user manual.