10
Ordercode: 50794
Truss Booster RDM 1-6
Control Modes
Multiple Truss Boosters (DMX/RDM control)
01)
Fasten the Truss Boosters to a truss.
02)
Always use a safety cable (ordercode 70140 / 70141).
03)
Use a 5-pin XLR cable to connect the Truss Boosters and other devices.
04)
Connect the first unit’s "in" socket to a light controller.
05)
Link the units as shown in Fig. 04. Connect the first unit's DMX "thru" socket with the second unit's "in"
socket, using a DMX signal cable. Repeat this process to link the second, third, and fourth unit.
06)
Connect light fixtures to the unit’s DMX/RDM "out" sockets.
07)
Supply electric power: Plug the unit’s mains power cord into proper electric power supply sockets,
starting with the first unit. Do not supply power before the whole system is set up and connected
properly.
Multiple Truss Boosters DMX Setup
Fig. 04
Note : Link all cables before connecting electric power
Summary of Contents for Truss Booster RDM 1-6
Page 16: ...2019 Showtec...
