SHOWTEC SC-2412, Manual, Page: 9 / 32

8
Ordercode: 50710
SC-2412
05) Park button
Press this button to select either Single chase
mode or Mix chase mode. In Single chase
mode you are only able to playback a single
scene. In mix mode you are able to playback
several scenes simultaneously. Move the
faders 13-25 to set the master intensity for the
respective scene (fader 13: scene 1, fader 14:
scene 2 etc.). Chase mode is indicated by the
Chase mode indicator (15).
06) Up/chase rev
Press this button to modify a scene while in Edit
mode. In combination with the record/shift
(14) button, this button allows you to reverse
the direction of a chase while in Playback
mode.
07) Delete/rev one
Press this button to delete a step or chase
while in Edit mode. In combination with the
record/shift (14) button, this button allows you
to reverse the direction of a single chase while
in Playback mode.
Fig. 03
08) Page/record clr page LEDs
Each page can contain 12 scene/chases. This means that you can store up to 48 scenes/chases.
09) Aux 1 c button
The aux control and button can be assigned to any DMX channel. Each aux control can be set in
three modes:
●
Mode 1: The control is not assigned to a DMX channel.
● Mode 2: The control and control button work as a normal channel fader and flash button (max.
brightness).
● Mode 3: The control is used for adjusting the brightness of the flash button.
10) Insert/% or 0-255
Press this button to insert one or more steps (scenes) into a chase. Press and hold down the
record/shift (14) button, and press this button to switch the DMX output value on the display as either
0-100% or 0-255.
11) Aux 2 c button
The aux control and button can be assigned to any DMX channel. Each aux control can be set in
three modes:
●
Mode 1: The control is not assigned to a DMX channel.
● Mode 2: The control and control button work as a normal channel fader and flash button (max.
brightness).
● Mode 3: The control is used for adjusting the brightness of the control button.
12) Add kill/rec exit
Press this button to enter Add mode, Kill mode or exit Record mode. In Add mode, this button allows
you to activate multiple scenes or flash buttons. In Kill mode, selecting a scene or a flash button will
kill any other active scene program. In Record mode, in combination with the record/shift (14)
button, this button allows you to exit Record mode.
13)
Edit/all rev
Press this button to activate Edit mode. Press this button, while holding down the record/shift (14)
button, to reverse the direction of all chases.