21
Ordercode: 50710
SC-2412
Playback
Playing a Scene/Chase
01)
Select Chase < > scene mode by tapping the mode select/rec
speed (05) button. It will give you control of all 24 channels on
the selected page.
02)
Tap the page (08) button to select the page, where the
scene/chase, you want to play is stored on.
03)
Move the master B (34) fader to its maximum position (fully
down).
04)
Move the corresponding chase/scene fader (channel faders 13-
24) to its maximum position to start the chase/scene. The
chase/scene will fade in, depending on the current fade time.
05)
Move the corresponding chase/scene fader (channel faders 13-
24) to adjust the overall output of the chase/scene.
Notes
●
The current mode is indicated by the 3 LEDs:
Red indicates that Chase < > scene mode is selected.
Yellow indicates that the 2-scene preset A/B mode is selected.
Green indicates that 1-24 single mode is selected.
●
You may press and hold down the relevant flash button for the scene to trigger the button
momentarily.
Summary of Contents for SC-2412
Page 31: ...30 Ordercode 50710 SC 2412...
Page 32: ...2019 Showtec...
