SHOWTEC SC-2412, Manual, Page: 18 / 32

17
Ordercode: 50710
SC-2412
08) Tap the step button (17) until you reach the scene you want to
edit.
09) Press and hold down the up/chase rev (06) button if you want to
increase the output value of a DMX channel.
10)
Press and hold down the down/beat rev (28) button if you want
to decrease the output value of a DMX channel.
11)
While holding down either the up/chase rev (06) button or the
down/ beat rev (28) button, tap the corresponding flash button
to respectively increase or decrease that channel’s DMX output.
12)
Repeat steps 8-11 until all scenes have been edited.
13) Exit Program mode, press and hold down the record/shift (14)
button and tap the add kill/rec exit (12) button.
Delete a Scene/Chase
01)
While holding down the record/shift (14)
button, tap the flash (03) buttons #1-5-6-
8 in sequence.
02)
Release the record/shift (14) button.
The record LED will light up. Now you are
in Program mode (record enable).
03) Press the page (08) button to select the page which the
scene/chase you want to delete is on.
04) While holding down the edit/all rev (13) button, tap the flash
(03) button, corresponding with the scene/chase you want to
delete, twice.
05)
Release the edit/all rev (13) button. All LEDs will flash briefly,
indicating that the scene/chase has been deleted.